Radnor RDX60 Welding Helmet Review

Radnor RDX60 Welding Helmet ReviewBeing able to have a high quality helmet is essential when welding. In this profession, eye injuries are one of the most common types of injuries and it can be prevented by wearing a good helmet. By not wearing a helmet, not only can you get injured by flying materials, but you can also get burns from the bright light and the chemicals. When looking for a suitable welding helmet, there are a few things you want to look for. Those things will be discussed below in regards to the Radnor RDX60 helmet.

Clarity/Viewing Area

While it's important to have a helmet to protect you, you want to make sure that you can easily see out of it. You don't want to have a helmet that has a tiny viewing area or one that doesn't have very good clarity because you can end up harming yourself because you can't see. This helmet has a decent viewing area. This means that you will be able to do your work and be able to see as if you didn't have a helmet on. In addition, the fact that the shade isn't dark all the time really helps you be able to see clearly. This is great for when you haven't started welding yet but you are getting everything together. You don't have to worry about everything being so dark that you really have to struggle to see what you're doing.


The next thing you want to look for when choosing a welding helmet is the weight and portability. In terms of the actual weight, you don't want to have something that is so heavy that it puts serious strain on your head and neck. Not only could that cause injury, but it could also make your work much harder. When looking at portability, you don't want something that's going to take a lot of effort to carry around and move. You also don't want something so big that it takes up a massive amount of room. This is going to result in you not even wanting to mess with the helmet. When looking at both of these things in regards to this helmet, it only weighs 1 pound so you don't have to worry about any strain or issues moving it. In addition, it's only about an inch tall so it shouldn't take up too much room.


Another thing you want to look for in a welding helmet is comfort. This might seem like it isn't very important, but you don't want to have to use a helmet with no padding or any other comfort features for long periods of time. This can lead to soreness and, again, just not wanting to mess with the helmet at all. Not wanting to mess with the helmet will lead to welding without any type of protection and that can really cause you serious harm. In terms of comfort, the Radnor RDX60 has padding on the inside so you don't have to worry about any type of soreness from having to have the material rubbing on your skin. In addition, you won't have to worry about the material cutting into your skin and causing you to bleed.

Shade Settings

Being able to have a decent shade is one of the highest priorities when it comes to using a welding helmet. Not only will it protect you from the brightness of welding, but it will also protect you from any chemicals and flying materials. Not having a decent shade can really injure your eyes. This helmet actually has an auto-darkening shade. This means it darkens by itself when the brightness starts. It also has three different modes to choose from. This is great because you can choose which level of darkness you need depending on the brightness and danger of the welding job you're doing. With that being the case, you don't have to worry about not being able to see or not having enough protection.


Something else that is extremely important with welding helmets is reliability. You don't want to skimp and get one that is lower quality because it has a higher chance of failing or falling apart. Not only could this result in you spending more money because you have to replace the helmet, but you could get seriously hurt because the helmet isn't working the way it's supposed to be. The great thing about this particular helmet is that it has less pieces and components so there is less that can break. It also has materials that are simple yet effective. This means that they have been highly tested so you know exactly what you're getting!

Other Features

In addition to all of these features, there are a few other features that the Radnor RDX60 has that makes it high quality and a top choice. These are things that make the overall helmet better and safer. Some of those additional features are listed below.

  • It reduces electromagnetic noise interference
  • It increases detection of different arcs
  • The shell of the helmet is made from high-quality, heat-resistant materials
  • It has the highest rating it can get for optical quality
  • The X-TIG mode makes it so there is a higher sensitivity for things like sunlight interference, low amperage, and out-of-position welding
  • The internal controls are extremely easy to operate

As you can see, the Radnor RDX60 helmet is one that would be a fantastic choice for anyone in this profession or anyone who just likes to weld in their free time. Not only does it have great features, but it really has everything you want in order to keep yourself safe while working. If you need a new helmet or if this is your first purchase, you really can't go wrong with this piece of equipment!